Extratime For Render.png

EXTRATIME

RENDER RETARDER
  • Extend render setting times by around 60mins*

  • Ideal for working on larger areas

  • For sand/cement render and pebbledashing

  • 1 sachet for every 25Kg of cement

 
WHAT IS

EXTRATIME RENDER RETARDER?

DESIGNED BY THE TRADE FOR THE TRADE
whitebackground.jpg
IDEAL FOR RENDERING LARGE AREAS AND PEBBLEDASHING

Extratime Render Retarder is a chemical additive for use with sand and cement render. The additive slows the curing process of the render by slowing the chemical crystal formation that causes the it to set or harden. Extratime is recommended for moderate lengthening of sand and cement render setting times. Extratime Render Retarder will lengthen the setting time by around 60 minutes depending on the ambient temperature, relative humidity of the environment and the surface being rendered.

Extratime Render Retarder has been developed by a plasterer with over 20 years experience in the trade to  allow more time to complete larger areas. It is ideal for very large projects.

 

"After years of being under pressure when working on pebbledashing jobs I thought there must be some way of making the job easier.  I set out to develop something that was easy to use, inexpensive and provided a little more time - The result was Extratime Render Retarder"  M Shepherd, Founder, Eazymix Ltd.

 

Extratime Render Retarder is only suitable for sand and cement renders, it cannot be used with premixed Monocouche renders such as K-Rend etc. It helps make rendering easier especially when working on large areas. It simply takes the pressure off.

download.png

Recommended

MORE TIME

Delays setting times by up to 60 minutes for larger areas

CONVENIENT

No measuring, weighing or experimenting

LOW PRICE

Competitive pricing for trade and DIY applications

  1. Pour 1L of clean fresh water into a cement mixer

  2. Add Extratime Render Retarder and mix thoroughly

  3. Add sand, cement and water as normal 

  4. Apply exactly as normal render and enjoy around 60 minutes extra time before the render sets.

USER

INSTRUCTIONS

Extratime Render Retarder is an additive that lengthens the setting time of sand and cement render.

Please follow the user instructions carefully. 

Failure to follow the instructions may lead to application issues.

5 SIMPLE STEPS

FOR EXTENDING PLASTER SETTING TIMES BY UP TO

60 MINUTES 
 
 

WHAT CAN EXTRATIME BE USED WITH?

 

Extratime is suitable for use with sand and cement render.

 

It is NOT suitable for use with premixed Monocouche renders such as K-Rend​.

WARNINGS

  • Do not add directly to the sand and cement mix.

  • Avoid direct contact with eyes and skin.

  • Wear eye protection, protective gloves, long-sleeved clothing and trousers to prevent direct contact.

  • If eye contact occurs, immediately flush thoroughly with water for 30 minutes and seek immediate medical advice.

  • Wash thoroughly with soap and water after use.

  • Do not ingest. If ingested, seek medical advice immediately.

  • Once opened use within 48 hours.

  • For best before date see individual sachet.

The information relating to the application of Eazymix Ltd.'s products are given in good faith based on extensive testing, application and current knowledge when properly stored, handled and applied under normal conditions in accordance with Eazymix’s recommendations.

In practice, differences in organic materials, substrates and site conditions are such that no warranty, nor liability can be inferred either from this information or from any written recommendations or from any other advice offered.  The user must test the products suitability for the intended application and purpose.

Our liability is expressly limited to replacement of defective goods or to refund their price.  Any claim shall be deemed waived unless made in writing to us within 30 days from the date it was or reasonably should have been discovered.

Limited Warranty

Eazymix Ltd. Warrants that the goods shall comply with their description and be free from material defect at the time of delivery. This warranty does not apply to the extent that any defect has been caused by incorrect storage or use. 

FAQs

What Would You Like to Know? For any questions that are not answered below click here and contact us

HOW LONG DOES EXTRATIME EXTEND THE SETTING TIME?

 

Extratime is recommended for moderate lengthening of render setting times. Extratime Render Retarder will lengthen the setting time by around 60 minutes depending on the ambient temperature and relative humidity of the environment and the surface suction.

DOES EXTRATIME AFFECT THE RENDER?

Extratime has been extensively tested and it does not affect the render mix or finished substrate in any detrimental way. Full curing time will be extended to 24-48 hours.

DOES THE RENDER NEED TO BE APPLIED IN A DIFFERENT WAY?

 

No. Once Extratime is added, mix and apply the renderusing exactly the same method as normal render.

 
WHAT DO OUR
 

CUSTOMERS

THINK?
WHAT ARE THEY

SAYING?

ROBERT HUGHES

PLASTERER

 

Definitely provided more time

PR PLASTERING & RENDERING

Extra time was brilliant made my life so much easier and allowed me to take my time and make sure everything was perfect would recommend to every renderer when a bit more time is needed.

A DWYER

PLASTERER

I am not the fastest at rendering but managed to render the full wall easily