Extend plaster setting times by up to 60mins*
Ideal for plastering larger areas
Use with all finishing plasters
1 sachet for every 25Kg of plaster
MANUFACTURED AND TESTED TO
BS EN 13279-2 : 2014
DESIGNED BY THE TRADE FOR THE TRADE
IDEAL FOR CEILINGS AND LARGE WALLS
Extratime is a chemical additive for use with finishing plasters. The additive slows the curing process of the plaster by slowing the chemical crystal formation that causes the gypsum plaster to set or harden. Extratime is recommended for moderate lenthening of finishing plaster setting times. Extratime will lengthen the setting time by 30-60 minutes depending on the ambient temperature, relative humidity of the environment and the surface being plastered.
Extratime has been developed by a plasterer with over 20 years experience in the trade to allow more time to complete larger areas. It is ideal for ceilings and large walls.
"After years of being under pressure when working on large ceilings and walls I thought there must be some way of making the job easier. I set out to develop something that was easy to use, inexpensive and provided a little more time - The result was Extratime" M Shepherd, Founder, Eazymix Ltd.
Extratime can be used with all finishing plasters. It helps make plastering easier especially when working on large areas or in hot weather. It simply takes the pressure off.
MANUFACTURED AND TESTED TO BS EN 13279-2 : 2014
Delays setting times by up to 60 minutes for larger areas
No measuring, weighing or experimenting
Manufactured and tested to all relevant British and European Standards by UKAS Accredited Labs
Pour clean fresh water into a mixing bucket
Open Extratime sachet and whisk thoroughly
Gradually add plaster and whisk thoroughly
Continue adding and whisking plaster until smooth, lump free and it reaches the desired consistency
Apply exactly as normal plaster and enjoy up to 60 minutes extra time before the plaster sets.
Extratime is an additive that lengthens the setting time of finishing plaster.
Please follow the user instructions carefully.
Failure to follow the instructions may lead to application issues.
5 SIMPLE STEPS
FOR EXTENDING PLASTER SETTING TIMES BY UP TO
WHAT CAN EXTRATIME BE USED WITH?
Extratime is suitable for use with all finishing plasters. The following products are suitable:
Multi Finish Plaster
Board Finishing Plaster
Do not add directly to the plaster, dissolve in fresh water first.
Avoid direct contact with eyes and skin.
Wear eye protection, protective gloves, long-sleeved clothing and trousers to prevent direct contact.
If eye contact occurs, immediately flush thoroughly with water for 30 minutes and seek immediate medical advice.
Wash thoroughly with soap and water after use.
Do not ingest. If ingested, seek medical advice immediately.
Once opened use within 48 hours.
For best before date see individual sachet.
The information relating to the application of Eazymix Ltd.'s products are given in good faith based on extensive testing, application and current knowledge when properly stored, handled and applied under normal conditions in accordance with Eazymix’s recommendations.
In practice, differences in organic materials, substrates and site conditions are such that no warranty, nor liability can be inferred either from this information or from any written recommendations or from any other advice offered. The user must test the products suitability for the intended application and purpose.
Our liability is expressly limited to replacement of defective goods or to refund their price. Any claim shall be deemed waived unless made in writing to us within 30 days from the date it was or reasonably should have been discovered.
Eazymix Ltd. Warrants that the goods shall comply with their description and be free from material defect at the time of delivery. This warranty does not apply to the extent that any defect has been caused by incorrect storage or use.
What Would You Like to Know? For any questions that are not answered below click here and contact us
HOW LONG DOES EXTRATIME EXTEND THE SETTING TIME?
Extratime is recommended for moderate lenthening of finishing plaster setting times. Extratime will lengthen the setting time by 30-60 minutes depending on the ambient temperature and relative humidity of the environment.
DOES EXTRATIME AFFECT THE PLASTER?
Extratime has been extensively tested and it does not affect the plaster mix or finished plastered substrate in any detrimental way.
DOES THE PLASTER NEED TO BE APPLIED IN A DIFFERENT WAY?
Once Extratime is added, mix and apply the plaster using exactly the same method as normal plaster.
WHAT DO OUR
WHAT ARE THEY
I used Extratime on a large ceiling which would of normally taken two of us.I did it on my own with plenty of time to spare.I also saved paying another man for the day excellent stuff
Extra time was brilliant made my life so much easier and allowed me to take my time and make sure everything was perfect would recommend to every plasterer
I am not the fastest plasterer but managed to plaster the full room in one go using Extratime