top of page
halftime-plasteraccelerator.png

HALFTIME

PLASTER ACCELERATOR
  • Speed up plaster setting times by up to 60mins*

  • Ideal for plastering small areas

  • Use with all finishing plasters

  • 1 sachet for every 5.5 Litres of water (approx. 12.5Kg of plaster)

  • MANUFACTURED AND TESTED TO BS EN 13279-2 : 2014

WHAT IS IT?
WHAT IS

HALFTIME?

DESIGNED BY THE TRADE FOR THE TRADE
halftime-plasteraccelerator.png
SHORTENS THE SETTING TIME OF FINISHING PLASTER

Halftime Plaster Accelerator is a chemical additive for use with finishing plaster. The additive creates a fast set plaster by speeding up the chemical crystal formation that causes plaster to set or harden. Halftime is recommended for shortening the setting time of finishing plaster. Halftime will shorten the setting time by up to 60 minutes, depending on the ambient temperature and relative humidity of the working environment.

MANUFACTURED AND TESTED TO BS EN 13279-2 : 2014

FAST SET

Speeds up setting times by up to 60 minutes, ideal for small jobs

CONVENIENT

No measuring, weighing or experimenting

QUALITY ASSURED

Manufactured and tested to all relevant British and European Standards by UKAS Accredited Labs

Halftime User Instructions

Halftime User Instructions

Watch Now
  1. Pour clean fresh water into a mixing bucket

  2. Open Halftime sachet and whisk thoroughly

  3. Gradually add plaster and whisk thoroughly

  4. Continue adding and whisking plaster until smooth, lump free and it reaches the desired consistency 

  5. Apply exactly as normal plaster and speed up setting times by up to 60 minutes.

USER

INSTRUCTIONS

Halftime is an additive that reduces the setting time of finishing plaster.

Please follow the user instructions carefully. 

Failure to follow the instructions may lead to application issues.

5 SIMPLE STEPS

FOR REDUCING PLASTER SETTING TIMES BY UP TO

60 MINUTES 
USER INSTRUCTIONS
WARNINGS

WHAT CAN HALFTIME BE USED WITH?

 

Halftime is suitable for use with all finishing plasters. The following products are suitable:

  • Multi Finish Plaster

  • Finishing Plaster 

  • Board Finishing Plaster

WARNINGS

  • Do not add directly to the plaster, dissolve in fresh water first.

  • Avoid direct contact with eyes and skin.

  • Wear eye protection, protective gloves, long-sleeved clothing and trousers to prevent direct contact.

  • If eye contact occurs, immediately flush thoroughly with water for 30 minutes and seek immediate medical advice.

  • Wash thoroughly with soap and water after use.

  • Do not ingest. If ingested, seek medical advice immediately.

  • Once opened use within 48 hours.

  • For best before date see individual sachet.

The information relating to the application of Eazymix Ltd.'s products are given in good faith based on extensive testing, application and current knowledge when properly stored, handled and applied under normal conditions in accordance with Eazymix’s recommendations.

In practice, differences in organic materials, substrates and site conditions are such that no warranty, nor liability can be inferred either from this information or from any written recommendations or from any other advice offered.  The user must test the products suitability for the intended application and purpose.

Our liability is expressly limited to replacement of defective goods or to refund their price.  Any claim shall be deemed waived unless made in writing to us within 30 days from the date it was or reasonably should have been discovered.

Limited Warranty

Eazymix Ltd. Warrants that the goods shall comply with their description and be free from material defect at the time of delivery. This warranty does not apply to the extent that any defect has been caused by incorrect storage or use. 

FAQs

What Would You Like to Know? For any questions that are not answered below click here and contact us

HOW MUCH QUICKER IS THE SETTING TIME??

?

 

Halftime will reduce the setting time by 30 to 60 minutes. The exact setting profile will be determined by the temperature of the room, the relative humidity and the surface being plastered.

DOES HALFTIME AFFECT THE PLASTER?

?

Halftime has been extensively tested and does not affect the plaster mix or the resulting plastered surface in any detrimental way.

DOES THE PLASTER NEED TO BE APPLIED IN A DIFFERENT WAY?

 

No. Once Halftime is added apply the plaster in exactly the same way as normal plaster.

FAQs
WHAT DO OUR
CUSTOMER FEEDBACK

CUSTOMERS

THINK?

Halftime Reviews

Halftime Reviews

Halftime Reviews
3 hour PLASTERING from Brick to Finish

3 hour PLASTERING from Brick to Finish

15:40
Play Video
5 Plastering Tools I Use On Every Job

5 Plastering Tools I Use On Every Job

05:30
Play Video
Ceiling Plastered In Half The Time With Half Time Plaster Accelerator

Ceiling Plastered In Half The Time With Half Time Plaster Accelerator

05:19
Play Video
Using the Halftime Plaster Accelerator for the first time.

Using the Halftime Plaster Accelerator for the first time.

04:58
Play Video
WHAT ARE THEY

SAYING?

ANDY ROBERTS

PLASTERER

Using Halftime has really changed the way i work its the best thing to come out in this industry.I can complete jobs faster than ever before.I found i can now earn 30% more money a week even doing small jobs on the way home in less than an hour

LUKE BARNES

PLASTERER

I use Halftime when plastering onto Sand and Cement render it normally takes ages to go off but with Halftime it sets a lot faster saves sitting in the van waiting

DANIEL EVANS

PLASTERER

I use Halftime every day now and could not be without it.Completing jobs a lot faster and getting home a lot earlier

STOCKISTS
STOCKISTS
bottom of page